The UneoTM pressure sensor series is a Wall Street Journal Technology Award and Edison Award winning ultrathin flexible force sensing sensor suitable for a wide range of human-machine interface measurement from a gentle finger touch to full-body weighing scales. The patent-pending sensor technology employs the latest advances in piezoresistive polymer composite processing and printing-based micromachining technology to enable simple and high-quality linear output in the form of variable conductance (inverse of resistance) that is proportional to the input force.
- Linearity Exceeding 99% over 0 to 10N
- Capable of up to 10 Million Actuations
- Wide Temperature Range -40°C ~ 65°C
- Compatible with Simple Voltage-Divider Readout
- Environmentally-Friendly Fabrication
- 1.The equivalent pressure on sensor can be computed as the force on sensing area divided by the sensor area.
- 2.Linearity indicates how well force vs. sensor conductance is correlated linearly. It is computed by taking the coefficient of determination, or R2, of measurements in sensor's operating force range.
- 3.Repeatability accounts for how well the sensor can reproduce a reading when the same force is applied within the rated operating force range. UneoTM sensor is manufactured to minimize need for additional sensor pre-conditioning.
- 4.Hysteresis is the difference between sensor output values when force is added or removed continuously from the sensor. The value is defined by the maximum difference in sensor output values, at the same force, during the loading and unloading of force in the rated operating force range.
- 5.Drift is the gradual shift the sensor output while the sensor is subjected to a fixed force, and is defined as percentage of shift relative to initial reading over time. Typically, the sensor conductance will increase gradually with time, so such factor should be considered to derive accurate force measurement.
- 6.Response time (tR ) is defined as the time for the incremental change in the output to get from 10% to 90% of the final value when subjected to a change in applied force.
- 7.Temperature Sensitivity is measured by the percentage change in output conductance per change in operating temperature.